 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CXD1254AR/AQ CCD Camera Synchronization and Timing Signal Generator Description The CXD1254AR and CXD1254AQ Ics generates the necessary synchronization and timing signals for camera systems employing CCD image sensors (ICX044, ICX045, ICX046, etc.). Features * Supports color (NTSC) and black & white (EIA/CCIR) systems * On-chip electronic shutter * On-chip horizontal (H) driver * Timing generator for mirror images Applications CCD camera systems Structure Silicon gate CMOS IC CXD1254AR 64 pin LQFP (Plastic) CXD1254AQ 64 pin QFP (Plastic) Absolute Maximum Ratings (Ta=25 C, VSS=0 V) * Supply voltage VSS -0.5 to +7.0 V * Input voltage VSS -0.5 to VDD +0.5 V * Output voltage VSS -0.5 to VDD +0.5 V * Operating temperature -20 to +75 C * Storage temperature -55 to +150 C Recommended Operating Conditions * Supply voltage 4.75 to 5.25 * Operating temperature -20 to +75 V C Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits. --1-- E91845B67-TE CXD1254AR/AQ Block Diagram (Pin No.s given for CXD1254AR) TEST2 54 TEST3 58 TEST GENERATOR 1/525 or 1/625 COUNTER EXT 52 TEST1 48 RESET GENERATOR 1/65 COUNTER V-DECODER 4 5 1/7 or 1/6 COUNTER H-DECODER V-CONTROL D1 D2 D3 FLD 49 6 OUTPUT CONTROL 62 63 HD VD BF CBLK SYNC 1 2 64 H-INIT V-RELATIVE COUNTER H-RELATIVE COUNTER H-RELATIVE COUNTER V-INIT V-ROM (VD1) LATCH ADDRESS COUNTER LATCH ADDRESS COUNTER C KIN 11 OSCI 1/3 LATCH 1/2 H-ROM (HD1) H-ROM (HD2) H-ROM (HD3) H-ROM (RD1) H-ROM (RD2) 9 OSCO 10 CL 3 RESET LATCH LATCH LATCH CK GENERATION SELECT SERIALPARALLEL CONVERTER PHASE CONT. COUNTER/GATE GATE GATE GATE GATE PS 16 ED0 13 ED1 14 ED2 15 ENB 12 37 38 18 19 20 21 34 33 35 SHUTTER ROM 36 23 25 45 39 46 41 42 43 44 27 26 29 31 28 30 RG XSHD XSUB XSHP --2-- XSG1 XSG2 H2 XSP1 XDL1 H3 XSP2 PBLK XDL2 CLP1 CLP2 BFG ID CLP3 CLP4 XV1 XV2 XV3 XV4 H1 H4 CXD1254AR/AQ Pin Configuration (1) TEST1 XSHD 34 PBLK 48 47 46 45 44 43 42 41 40 39 38 37 36 XSP2 CLP2 CLP1 ID XDL1 VDD 35 33 FLD HTSG VDD EXT VSS TEST2 NC VDD NC TEST3 VSS NC NC BF CBLK SYNC 49 50 51 52 53 54 55 56 CXD1254AR 57 58 59 60 61 62 63 64 XSHP 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 CLP4 CLP3 XDL2 BFG XSP1 VSS VSS XV4 XSG2 XV3 XSG1 XV1 XV2 XSUB VDD RG AVSS H4 H3 H2 H1 AVDD 1 HD 2 VD 3 CL 4 D1 5 D2 6 D3 7 TRIG 8 VSS 9 OSCI 10 11 12 13 14 15 16 OSCO ED1 CKIN ED2 ENB Mode D1 D2 D3 ENB ED0 ED1 ED2 PS EXT TEST2 Pin No. 4 5 6 12 13 14 15 16 52 54 PRESET Low Low Low High High High High High Low Low Low NTSC/EIA Normal Image Color Normal ED0 High CCIR Mirror Image B/W Shutter Shutter Speed Serial input Parallel input Internal External Normally Low --3-- PS CXD1254AR/AQ Pin Configuration (2) TEST1 XSHD XSP2 CLP2 CLP1 XDL1 XSHP PBLK CLP4 CLP3 XDL2 BFG FLD XSP1 51 HTSG 52 VDD 53 EXT 54 VSS 55 TEST2 56 NC 57 VDD 58 NC 59 TEST3 60 VSS 61 NC 62 NC 63 BF 64 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 XSG2 XV3 XSG1 XV1 XV2 XSUB VDD RG AVSS H4 H3 H2 H1 XV4 26 25 24 23 22 21 20 19 VDD VSS ID CXD1254AQ 1 CBLK 2 SYNC 3 HD 4 VD 5 CL 6 D1 7 D2 8 D3 9 TRIG 10 11 12 13 14 15 16 17 18 VSS OSCI ED0 OSCO ED1 CKIN ED2 ENB PS VSS Mode D1 D2 D3 ENB ED0 ED1 ED2 PS EXT TEST2 Pin No. 6 7 8 14 15 16 17 18 54 56 PRESET Low Low Low High High High High High Low Low Low NTSC/EIA Normal Image Color Normal High CCIR Mirror Image B/W Shutter Shutter Speed Serial input Parallel input Internal External Normally Low --4-- AVDD CXD1254AR/AQ Pin Description Pin No. LQFP QFP 1 3 2 4 3 5 4 6 5 7 6 8 7 9 8 10 9 11 10 12 11 13 12 14 13 15 14 16 15 17 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 Pin HD VD CL D1 D2 D3 TRIG VSS OSCI OSCO CKIN ENB ED0 ED1 ED2 PS AVDD H1 H2 H3 H4 AVSS RG VDD XSUB XV2 XV1 XSG1 XV3 XSG2 XV4 VSS XSHP XSHD XSP1 XSP2 XDL1 XDL2 BFG VSS I/O O O O I I I I -- I O I I I I I I -- O O O O -- O -- O O O O O O O O O O O O O O O -- Function Horizontal drive pulse output Vertical drive pulse output Clock output NTSC/EIA: 14.318 MHz CCIR: 14.1875 MHz Mode selection "Low": NTSC/EIA "High": CCIR (Pull-down resistor) Mode selection "Low": Normal "High": Mirror (Pull-down resistor) Mode selection "Low": Color "High": B/W (Pull-down resistor) Shutter speed setting pulse input (Pull-up resistor) GND for signal generator Oscillator input NTSC/EIA: 28.636 MHz CCIR: 28.375 MHz Oscillator output Input for determining oscillator duty cycle Shutter selection "Low": Normal "High": Shutter (Pull-up resistor) Shutter speed control (Pull-up resistor) Shutter speed control (Pull-up resistor) Shutter speed control (Pull-up resistor) Shutter speed setting data format selection "Low": Serial "High": Parallel (Pull-up resistor) Independent power supply for horizontal driver Clock output for horizontal register driver Clock output for horizontal register driver (Leave open except for ICX046.) Clock output for horizontal register driver (Use as H2 except for ICX046.) Clock output for horizontal register driver (Leave open except for ICX046.) Independent GND for horizontal driver Reset gate pulse output Power supply for timing generator Sensor charge sweep output pulse output Clock output for vertical register driver Clock output for vertical register driver Sensor charge readout pulse output Clock output for vertical register driver Sensor charge readout pulse output Clock output for vertical register driver GND for timing generator 1 Pre-charge level/sample-and-hold pulse output 1 Data sample-and-hold pulse output 1 Color separation sample-and-hold pulse output 1 Color separation sample-and-hold pulse output 1 Pulse output for delay line 1 Pulse output for delay line Burst flag gate pulse output GND for timing generator --5-- CXD1254AR/AQ Pin No. LQFP QFP 41 43 42 44 43 45 44 46 45 47 46 48 47 49 48 50 49 51 50 52 51 53 52 53 54 55 56 57 58 59 60 61 62 63 64 54 Pin CLP1 CLP2 CLP3 CLP4 PBLK ID VDD TEST1 FLD HTSG VDD EXT I/O O O O O O O -- I I/O I -- I Function Pulse output for clamp Pulse output for clamp Pulse output for clamp Pulse output for clamp Blanking/cleaning pulse output Line discrimination pulse output Power supply for timing generator Test input/H reset pulse input Field pulse output/V reset pulse input XSG1, 2 controller/Test input Power supply for signal generator Synchronization mode selection. "Low": Internal "High": External GND for signal generator Test input (Normally open) Used open Power supply for signal generator Used open Test input (Normally fixed at "Low") GND for signal generator Used open Used open Burst flag pulse output Composite blanking pulse output Composite synchronization pulse output 2 2 2 (Pull-down resistor) (Pull-down resistor) -- 55 VSS I 56 TEST2 -- 57 NC -- 58 VDD -- 59 NC I 60 TEST3 -- 61 VSS -- 62 NC -- 63 NC O 64 BF CBLK O 1 SYNC O 2 (Note) 1...Output determined by mode setting. 2...Function determined by mode setting. Outputs for Pins Determined by Mode Setting 1 Pin XSHP XSHD XSP1 XSP2 XDL1 XDL2 Pin No. (LQFP) 33 34 35 36 37 38 D3 (Pin 6) O O O O O O Low (Color) XSHP ( ) output XSHD ( ) output XSP1 ( ) output XSP2 ( ) output XDL1 output XDL2 output O O O O O O High (B/W) SHP ( ) output SHD ( ) output (Out put stopped) (Out put stopped) (Out put stopped) (Out put stopped) --6-- CXD1254AR/AQ Functions for Pins Determined by Mode Settings 2 Pin TEST1 FLD HTSG Pin No. (LQFP) 48 49 50 EXT (Pin 11) I O I Low (Internal) Test input (Normally low) FLD output XSG1, 2 control input ("Low" : OFF "High" : ON) I I I High (External) H reset pulse input V reset pulse input Test input (Normally low) Electrical Characteristics 1) DC Characteristics Item Supply voltage Input voltage Output voltage 1 Output voltage 2 CL, RG, XSHP, XSHD, XSP1, XSP2, XDL1, XDL2 Output voltage 3 H1, H2, H3, H4 Output voltage 4 OSC0 Feedback resistance Pull-up resistor Pull-down resistor Symbol VDD VIH1 VIL1 VOH1 VOL1 VOH2 VOL2 VOH3 VOL3 VOH4 VOL4 RFB RPU RPD Conditions (VDD=5 V 0.25 V, Topr= -20 to +75 C) Min. 4.75 0.7 VDD VDD-0.5 0.4 VDD-0.5 0.4 VDD-0.5 0.4 VDD/2 500 k 40 k 40 k 2M 100 k 100 k VDD/2 5M 250 k 250 k Typ. 5.0 Max. 5.25 0.3 VDD IOH=-2 mA IOL=4 mA IOH=-4 mA IOL=8 mA IOH=-8 mA IOL=8 mA IOH=-1 mA IOL=1 mA VIN=VSS or VDD VIL=0 V VIH=VDD Unit V V V V V V V V V V V 2) Input/Output Capacitance Item Input pin capacitance Output pin capacitance Input/Output pin capacitance Symbol CIN COUT CI/O Min. Typ. (VDD=VI=0 V, fM=1 MHz) Max. 9 11 11 Unit pF pF pF --7-- CXD1254AR/AQ Electronic Shutter Description Pins for Shutter PS, TRIG, ENB Inputs for overall mode setting XSUB Output ED0, ED1, ED2 Inputs for shutter speed setting (Note) * Regardless of shutter speed setting controlled by PS, ED0 to ED2, and TRIG, if ENB is "Low", the shutter will be OFF. * The speed set by PS and ED0 to ED2 is subject to control by TRIG. Mode Description 1. TRIG (Pull-up resistor) * For normal shutter operation, TRIG should be either left Open or set at High. * For continuous variable shutter operation, input a clock pulse to TRIG. VD HD XSGI TRIG XSUB Shutter speded By taking out XSUB pulses between downward pulses of XSG1 and TRIG, and thus stopping XSUB pulses from the downward pulse of TRIG to the following downward pulse of XSG1, the shutter speed is determined. In order to increase the range of control when the TRIG pin is used to control the shutter speed, Pins ED0 to ED2 (described in next section) must be pre-set to 1/10000 sec. (Described in later section.) 2. ED0, ED1, and ED2 (Shutter speed control) PS (Selects between parallel/serial input) ENB (Shutter mode selection) 2-1. PS Selects either parallel or serial input data format to be used for determining shutter speed. * Parallel input Combination of the 3 bits, ED0, ED1, ED2, yields 8 possible shutter speed settings. * Serial input Shutter speed is determined by inputting ED0 (strobe), and ED1 (clock), and ED2 (data) to respective pins. --8-- CXD1254AR/AQ 2-1-1. [Parallel input] (PS = H) -- For high speed shutter only Table of Shutter Settings D1 ENB ED0 ED1 ED2 X L X X X L H H H H H H H H H L H L H H H H L H H X H H L H X H L L H X H H H L X H L H L X H H L L X H L L L Shutter speed Shutter OFF 1/60 (s) 1/50 (s) 1/100 (s) 1/120 (s) 1/250 (s) 1/500 (s) 1/1000 (s) 1/2000 (s) 1/4000 (s) 1/10000 (s) 2-1-2. [Serial input] (PS = L) The combination of serial data SMD1 and SMD2 can be used to select one of four modes. Shutter Mode Mode Flickerless High-speed shutter Low-speed shutter SMD1 Low Low High SMD2 Low High Low No shutter High High * Flickerless * High-speed shutter * Low-speed shutter * No shutter Mode for eliminating flicker caused by oscillation frequency of fluorescent lights. Shutter speed faster than 1/60 sec. (NTSC/EIA) or 1/50 sec. (CCIR). Shutter speed slower than 1/60 sec. (NTSC/EIA) or 1/50 sec. (CCIR). Shutter operation inactive. ED1 (CLK) ED2 (OATA) D0 D1 D2 D3 D4 D5 D6 D7 D8 SMD1 SMD2 Dummy EDO (STB) ED2 data is latched in the register on the rising edge of ED1 and the register contents are transferred during the low period of ED0. --9-- CXD1254AR/AQ AC Characteristics ED2 ts2 ED1 ts1 ED0 tW0 ts0 th2 Symbol ts2 th2 ts2 tw0 ts0 ED2 set-up time referenced from the ED1 rising edge ED2 hold-time referenced from the ED1 rising edge ED1 rise set-up time referenced from the ED0 rising edge ED0 pulse width ED0 rise set-up time referenced from the ED1 rising edge Min. 20 ns 20 ns 20 ns 20 ns 20 ns Max. -- -- -- 50 s -- 2-1-3. [Shutter speed calculation formula] High-speed Shutter * For NTSC/EIA T= [26210 - (1FF16 - L16)] x 63.56 + 34.78 s * For CCIR T= [31210 - (1FF16 - L16)] x 64 + 35.6 s Load value 0FA16 0FC16 10016 10816 11816 13716 17616 19616 NTSC/EIA Shutter speed 1/10000 1/4000 1/2000 1/1000 1/500 1/250 1/125 1/100 Calculated value 1/10169 1/4435 1/2085 1/1012 1/499 1/252 1/125 1/100 * L16: Load value Load value 0C816 0CA16 0CE16 0D616 0E616 10516 14316 14916 CCIR Shutter speed 1/10000 1/4000 1/2000 1/1000 1/500 1/250 1/125 1/100 Calculated value 1/10040 1/4349 1/2068 1/1004 1/495 1/250 1/125 1/120 Low-speed Shutter N = 2 x (1FF16 - L16) FLD "1FF" cannot be used as a load value. Load value Shutter speed (FLD) 1FE16 2 1FD16 4 : : 10116 508 10016 510 --10-- CXD1254AR/AQ External Synchronization Mode Description * H Reset The reset process is started from the first falling edge of the inputted reset pulse. The next reset occurs only when there is a divergence of at least a clock cycles (0.98 s) from the edge. The minimum reset pulse width is 0.98 s. The HD output reset position leads the H reset input by 2.45 to 2.94 s. 1H H reset input 0.98s and over HD output HD pulse reset at the falling edge of 0.98s and over 2.45 to 2.94s * V Reset The VD output reset position leads the falling edge of the V reset input by 3.5 to 4.0 H for NTSC/EIA and by 3.0 to 3.5 H for PAL. The minimum reset pulse width is 32 s. 1V V reset input 32s and over VD output 3.5 to 4.0H (NTSC/EIA) 3.0 to 3.5H (CCIR) 9H --11-- Timing Chart (1) FLD BLK VD HD SYNC BF XSG1 XSG2 --12-- XV1 XV2 XV3 XV4 PBLK CLP1 CLP2 CLP3 CLP4 ID CXD1254AR/AQ BFG EVEN Field FLD BLK VD HD SYNC BF XSG1 XSG2 --13-- XV1 XV2 XV3 XV4 PBLK CLP1 CLP2 CLP3 CLP4 ID BFG CXD1254AR/AQ Timing Chart (2) FLD BLK VD HD SYNC BF (4-1) BF (2-3) XSG1 XSG2 --14-- XV1 XV2 XV3 XV4 PBLK CLP1 CLP2 CLP3 CLP4 ID CXD1254AR/AQ BFG EVEN Field FLD BLK VD HD SYNC BF (3-4) BF (1-2) XSG1 XSG2 --15-- XV1 XV2 XV3 XV4 PBLK CLP1 CLP2 CLP3 CLP4 ID CXD1254AR/AQ BFG NTSC/EIA Normal Mode H Direction Timing Chart Timing Chart (3) Color B/W HD BLK HSYNC EQ VSYNC BF CL CLK H1 H2 H3 H4 RG --16-- XSHP XSHD SHP SHD XSP1 XSP2 XDL1 XDL2 XV1 XV2 XV3 XV4 PBLK CLP1 CLP2 CLP3 CLP4 ID BFC CXD1254AR/AQ XSUB NTSC/EIA Mirror Mode H Direction Timing Chart Timing Chart (4) Color B/W HD BLK HSYNC EQ VSYNC BF CL CLK H1 H2 H3 H4 RG --17-- XSHP XSHD SHP SHD XSP1 XSP2 XDL1 XDL2 XV1 XV2 XV3 XV4 PBLK CLP1 CLP2 CLP3 CLP4 ID BFC CXD1254AR/AQ XSUB CCIR Normal Mode H Direction Timing Chart Timing Chart (5) HD BLK HSYNC EQ VSYNC BF CL CLK H1 H2 H3 H4 RG --18-- XSHP XSHD SHP SHD XSP1 XSP2 XDL1 XDL2 XV1 XV2 XV3 XV4 PBLK CLP1 CLP2 CLP3 CLP4 ID BFC CXD1254AR/AQ XSUB CCIR Mirror Mode H Direction Timing Chart Timing Chart (6) HD BLK HSYNC EQ VSYNC BF CL CLK H1 H2 H3 H4 RG --19-- XSHP XSHD SHP SHD XSP1 XSP2 XDL1 XDL2 XV1 XV2 XV3 XV4 PBLK CLP1 CLP2 CLP3 CLP4 ID BFC CXD1254AR/AQ XSUB CXD1254AR/AQ Application Circuit (LQFP Package) 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 CXD1254AR 32 31 30 28 27 26 25 24 23 22 21 20 19 18 17 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Shutter control OSC NTSC/EIA CCIR : 28.6363MHz : 28.375MHz * Please use a clock crystal which operates on a fundamental wave. Application circuits shown are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits or for any infringement of third party patent and other right due to same. --20-- Driver 29 CCD imase sensor Signal Processing CXD1254AR/AQ Package Outline CXD1254AR Unit : mm 64PIN LQFP (PLASTIC) 12.0 0.2 48 49 10.0 0.1 33 32 A 64 1 0.5 0.08 16 + 0.2 1.5 - 0.1 17 (0.22) + 0.08 0.18 - 0.03 + 0.05 0.127 - 0.02 0.1 0.1 0.1 0 to 10 0.5 0.2 NOTE: "" Dimensions do not include mold protrusion. DETAIL A PACKAGE STRUCTURE PACKAGE MATERIAL SONY CODE EIAJ CODE JEDEC CODE LQFP-64P-L01 QFP064-P-1010 LEAD TREATMENT LEAD MATERIAL PACKAGE WEIGHT EPOXY / PHENOL RESIN SOLDER/PALLADIUM PLATING 42/COPPER ALLOY 0.3g CXD1254AQ 64PIN QFP(PLASTIC) 23.9 0.4 + 0.4 20.0 - 0.1 51 33 0.5 0.2 (11.0) + 0.1 0.15 - 0.05 0.15 52 32 17.9 0.4 + 0.4 14.0 - 0.1 64 20 + 0.2 0.1 - 0.05 1 1.0 + 0.15 0.4 - 0.1 19 + 0.35 2.75 - 0.15 0.12 M PACKAGE STRUCTURE PACKAGE MATERIAL SONY CODE EIAJ CODE JEDEC CODE QFP-64P-L01 QFP064-P-1420 LEAD TREATMENT LEAD MATERIAL PACKAGE WEIGHT EPOXY RESIN SOLDER/PALLADIUM PLATING COPPER /42 ALLOY 1.5g --21-- 0.8 0.2 16.3 |
Price & Availability of CXD1254AQ
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |